Hold Down Plate Kit for Fiamma F45 Leg

This hold-down plate with screw peg kit will help keep your awning leg on the ground offering protection from the wind. Designed for the Fiamma F45 awning range, the plate is specifically designed and molded to fit the foot section at the bottom of an awning leg.

The screw peg kit is made from durable UV resistant plastic and includes both a hand driver & drill bit adapter allowing for use with an electric drill.

Inclusions:

  • 1x awning plate (150mm diameter)
  • 4x screw pegs
  • 1x hand screw adapter & 1x drill screw adapter

Notes:

  • This kit covers 1x awning leg. To cover both awning legs, you will need to purchase 2x packs.
  • The screw pegs are designed for soft to medium ground. We would recommend using steel pegs / screws (not included) on harder ground.

SKU CSAE510
Model # CSAE510
Barcode # Does not apply
Brand Campsmart
Colour Red
Shipping Weight 0.1450kg
Shipping Width 0.200m
Shipping Height 0.060m
Shipping Length 0.200m
Shipping Cubic 0.002400000m3
Type New
Location Code Small Parts 40

Write a review


Product appears to be good quality. includes drill socket adapter for drilling ground pegs. Haven't used kit yet so can't comment any further but it all looks good anyhow.


Haven’t had the opportunity to try the product out as yet thanks to another lockdown in Victoria but it appears well made and reasonably sturdy. Should hold up well in gentle winds, time will tell.

All items in our store are from reputable Australian suppliers and are covered by a 12-month  warranty for faults and defects.

Products must be used correctly and for the function they were designed for. Damage by customer misuse is not warrantable. 

For full warranty information, visit our warranty page - Click here. 

If you would like to submit a warranty claim, please submit a support ticket on our Customer Support Portal.

Click here to visit the portal

Due to the high incidence of online fraud, you will be required to provide proof of any warranty claims and may be required to return the item for assessment. 

Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. 

 

The screw peg kit is made from durable UV resistant plastic and includes both a hand driver & drill bit adapter allowing for use with an electric drill.

Inclusions:

  • 1x awning plate (150mm diameter)
  • 4x screw pegs
  • 1x hand screw adapter & 1x drill screw adapter

We Also Recommend

Curved Center Rafter for Fiamma F45 Awning
(9)
Waterproof XD 2.85m Campsmart Privacy Screen for 3m Box Awning
(1)
Tie Down Kit for Fiamma F45 S Awning (Yellow)
(2)

You May Also Like

Anti Flap Kit for Fiamma F45S Awnings - AFK
(3)
Sold Out
2.85m XD Privacy Screen for 3.0m Fiamma Awning
(6)
3.85m XD Privacy Screen for 4.0m Fiamma Awning
(1)

Others Also Bought

Supex Slight Curved Caravan Awning Rafter
(43)
Aussie Traveller Anti Flap Kit - Short White
(7)
ADCO 14-16 ft (4.28 - 4.89m) Camper Trailer Cover
(2)
$14.95
RRP $19.95