43L Modular Water Tank
Notify me when back in stock
43L Modular Water Tank
This innovative newly designed blow moulded modular Caravan & RV water tank will change the way you use water tanks. This one tank can be configured in many ways to provide a single low cost solution.
The tank is made from food contact approved High Molecular Weight High Density Polyethylene. This makes the tank a super tough performer. It is moulded with two integral 20mm (3/4 BSP) threaded closures that can accept a wide variety of standard fixtures and fittings. Using these standard fitting the tank can be networked together to provide almost limitless water storage options for your Caravan, Pop Top, Motorhome or Camper Trailer.
Fitting Guide:
All the fittings are standard 20mm (3/4 BSP) so use your own or purchase fittings from your local plumbing / hardware store to suit your preferred installation. Use Teflon tape or sealant to ensure all fittings are water tight. Do not cross thread fitting on tank.
Please note the fittings shown in the photo's are NOT included with the tank.
Specifications:
- Modular Water Tank 43 Litre
- Made from food contact approved, high density polyethylene.
- Weight: 2.1 Kgs.
- Dimensions: 86 cm x 26 cm x 22 cm.
Features:
- Two integrated 20mm (3/4 Male BSP) threaded connections can accept a wide variety of standard threaded pipe fittings.
- 3mm Breather holes should be drilled in the top, when the layout is complete.
Important:
Filling a tank under pressure can burst the tank, such damage is misuse and is not warrantable. Please seek expert advice or support if unfamiliar with fitting and filing of water tanks. It is the customers' responsibility to fit and fill the item correctly.
All items in our store are from reputable Australian suppliers and are covered by a 12-month warranty for faults and defects.
We operate in accordance with Australian Consumer Law.
Please choose carefully.
It is the customers' responsibility to read the terms and conditions prior to purchasing and to determine if a product is right for their use and vehicle.
Damage by misuse is not warrantable.
SKU | 200002 |
Model # | 200002 |
Barcode # | Does not apply |
Brand | BR Plastics |
Shipping Weight | 2.1000kg |
Shipping Width | 0.200m |
Shipping Height | 0.240m |
Shipping Length | 0.870m |
Shipping Cubic | 0.041760000m3 |
Type | New |
We offer a 30-day change of mind period for many but not all of our products.
Some products can not be returned once purchased.
Products that can not be returned:
- Caravan, camper trailer or pop-top caravan covers
- Awnings, Bedflys & Walls
- Custom made products
- Items that have been used or installed or damaged in any way.
It is the buyers' responsibility to:
- Read the terms and conditions (at the bottom of every page of our website) and decide if they would like to purchase these products.
- To read the product description and understand what they are purchasing
- Know the make and model of their own vehicle
- Measure their own vehicle
- Know what size item they need
Please refer to the full policies at the bottom of our website for further information.
product
By: russell middleton on 20 April 2021absolutely vantastic! wish i had seen your site and variety of tanks earlier. A simple and perfect tank.
(5)
Water tank
By: Pam on 17 September 2020Tank seems ok could have been thicker material as not that strong . Need to release air at the top when draining as it forms a suction sucking tank walls inwArd and causing damage if not noticed and corrected straight away .
(5)
43 litre water tank.
By: Chris Dawson on 24 August 2020Excellent product. Exactly as described. Prompt delivery.
(5)
water tank 43 l
By: trevor collins on 29 February 2020great product at a great price , it would be great if the threads were female instead of male and a third one was molded in as a vent to enable faster filling
(5)
43L modular water tank
By: Paul Royds on 4 October 2019Great, can't wait to fit it into my ex army 1966 workshop trailer
(5)